Troubleshoot Cannot Connect to Internet in Windows

Write a comment:

Browsing interrupted
Step 2 - Post an ipconfig from a working computer: An IP conflict is basically two or more devices on your network using the same IP address. If the modem is connected to a router, switch, hub or other network device, unplug the power supply from that device and replug it after 30 seconds. I must say however that winsock corruption is not the only cause that results in a Again, both computers at the same exact time? If not, just unplug the power cable from the router, wait 30 seconds and then plug it back in. Here is the second step.

Question Info

My computer will not connect to the internet

Wednesday, November 17, Do enable it back once you are done with the test. Did this solve your problem? Sorry this didn't help. Beginning verification phase of system scan. Windows Resource Protection found corrupt files but was unable to fix some of th em.

Details are included in the CBS. You may take the ownership of CBS. Locate the file on which you want to take ownership in windows explorer. Click on Edit Button and select user from given Change Owner to list if user or group is not in given list then, click on other users or groups. Once you have taken the ownership of file Grant Permissions to everyone-. If you click on advanced now click on Find Now and choose everyone and click Ok. Note The Windows Modules Installer service also writes to this log file.

The Windows Modules Installer service installs optional features, updates, and service packs. To perform this kind of search and to redirect the results to a text file, follow these steps: Click Start Collapse this imageExpand this i , type cmd in the Start Search box, right-click cmd in the Programs list, and then click Run as administrator.

Collapse this imageExpand this ima If you are prompted for an administrator password or for a confirmation, type your password, or click Continue.

I did that and even gave myself full acess as you mentioned in your recent post Tell us about your experience with our site. Need assistance from my agrivation Created on November 16, I have a toshiba l satellite Enabled Ethernet adapter Local Area Connection: This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 3. Vinod N Replied on November 17, Hello, Are you able to connect using WEP connection?

I suggest you to check disable the firewall and check. Also, take a look at the below articles: If you are using netgear router then see this: Thanks for marking this as the answer. You will not be able to use a wireless connection while in Safe Mode; please ensure all tests are performed with a wired Ethernet connection.

Thanks for the welcome. Better than a lot of forums I go on Here are the results. My other computer that is not working is running XP by the way. Hybrid IP Routing Enabled. No Ethernet adapter Local Area Connection: None Pinging youred96 [ Please check the name and try again. Ping statistics for OK Step1 - Check to ensure your adapter is working properly: Press Start Select Run Type devmgmt.

Click Start , select Run , type cmd and press OK In the new command prompt window, type netsh int ip reset reset. If you still cannot connect, please do the following.. Step 3 - Restart your machine in Safe Mode with Networking: I did step 1 and there were no red "x" or yellow "! After step 2 I restarted my computer and I still could not connect to the internet. I then tried going into Safe Mode with Networking and that also failed to work.

This was all done with an Ethernet cord plugged in as well. Another that may help you with solving the problem is that when my Ethernet cord is plugged into my router, it flashes. None of my other ones do that. I didn't think it was because there were to many plugged in though.

All 4 slots are filled. I tried switching them around in the different holes but that still got me no where. I don't know if it is something wrong with the cord or what. I just know the little light that is supposed to stay on when you plug in the ethernet cord to the router, is blinking.

Like a slow paced blink. When it is plugged into the computer it does not do that and none of my other computers Ethernet cords blink either.

Posted 08 March - Hey Zack, Have you tried switching the Ethernet cable connecting your problematic machine with one of the other Ethernet cables and seeing if a the problematic machine can connect with the new cable and b whether your other machines can connect with the problematic machines Ethernet cable?

That would be my first test to see if it's your Ethernet cable causing the issue. That's what I was thinking of doing but I wanted to know if there was other things I could do first I just changed the Ethernet cable from the computer the computer that wont work to the computer I'm on right now. It is still connected to the internet as I'm typing this. I'm guessing it is the computer. Sounds like a reasonable assumption.

Step 1 - Re-install your network adapter: You may need your Network adapter drivers CD in order to complete these steps. Click Start , select Run , type devmgmt. Restart your computer; upon reboot, Windows will detect New Hardware and ask you to install your network adapter; please proceed to do so. If you still can't get an Internet connection, please follow Step 2.

Step 2 - Post an ipconfig from a working computer: On one of your machines that has a working connection, please do the following: Posted 09 March - I did the first step, did not work.

Here is the second step. This is the computer that I have Vista running on. Yes Link-local IPv6 Address. Saturday, March 07, Tuesday, March 10, 4: Let's try "force" a connection by setting up a static IP.

Please do the following: Step 1 - Configure a Static IP: Once you have the Static IP in place, please do the following ping tests. Step 2 - Ping tests: Posted 11 April - This message is for DAN and any of the other techs reading this. DAN, I was having trouble getting on the Internet, just as many of the others who have posted this same problem. I could dial up ok, but every time I attempted to access the Internet, I received a message 'page not found' or 'done' but my homepage was not able to load.

Sometime ago, I recall the firewall program ZoneAlarm somehow was preventing people from accessing the Internet. If I remember correctly, there was a 'KB' submitted by Microsoft. Well, anyway, this morning I had the idea to uninstall ZoneAlarm from my system to see if that would help.

Related Articles